Specials

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Dimension Chainrings. - No ramps, pins, or shift aids

Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes. - A must-have in any bicycle service department - One-piece design - Shimano index compatible - Works with most friction shifters - Suitable for use with e-bike drivetrains

Replacement bar plugs for standard, compact, and SES Aero ENVE road cycling handlebars, because sometimes we lose stuff. - Sold individually

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Grade 10 chromium steel balls

Replacement Barends for GP4 Grips. - Note because of additional leverage of GP4 and GP5 bar ends, Ergon does not recommend using on carbon fiber handlebars - Glass fiber composite - For 2015 and newer grips

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

Ergon SMC mountain bike saddle. Further refined for even more comfort, the orthopedic foam is thicker, softer and creates a large contact area. Features a flat seat for dynamic sitting in different positions without tilting effects. - Orthopedic padding provides enhanced support and optimal pressure distribution - Provides optimal pressure distribution for sit and pelvic bones, the contoured surface area helps prevent saddle discomfort - The relief channel helps to avoid numbness and provides increased protection for soft-tissue areas

Ergon’s SR Sport Gel is the company’s breakthrough innovation in a women’s specific road bike saddle design. It’s shape and relief precisely fit the female anatomy in the rocked-forward position that is experienced on the road and gravel. The soft-tissue and seating area is noticeably more comfortable due to the ergonomically placed gel inlays.

- Easy-install, lock-on design - Secure double-locking alloy clamps - Comfortable dual-density Kraton rubber construction - Ergonomic palm rest reduces pressure points - 130mm

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- 3D forged alloy construction - Fits 1-1/8 (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

- The ultimate ergonomic combo grip - Dual-density Kraton rubber foundation - Strategically placed dual-density gel padding - Fully integrated, ergonomic horn bar end - Easy-install, lock-on design - Secure, integrated double locking clamps - 140mm

The Delta pedal is upgraded with a stainless abrasion plate to decrease direct scratch to pedal body, which increases durability. In addition to that, the material has been changed to thermoplastic which makes it lighter weight. The E-PR73ST features low stack height which allows greater ground clearance as well as increased pedaling efficiency. - 85 x 94 mm - Fiberglass-reinforced thermoplastic, enclosed mechanism, tension adjustable with gauge - 9/16"

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

- Mega Exo right hand threaded (RH) hollow carbon screws with a self-extracting cap - Designed to fit FSA MegaExo Cranks only - Includes bolt, self-extracting cap, and washers

This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers