Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Giant SLR 1 42mm Carbon Road Wheels 700c Rear
$798.00
Made with ultralight composite rims, this pro-level mid-profile aero WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1466g per pair
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Giant SLR 1 42mm Carbon CenterLock Disc Road Wheels 700c Rear
$798.00
Made with ultralight composite rims, this pro-level mid-profile aero disc WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 Disc is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite disc brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell, Centerlock Disc rotor mount and pawl based driver system - Includes end caps for the following configurations: - Rear: 142x12mm T/A & 130x5mm QR - 1580g per pair
Giant SLR 1 42mm Carbon CenterLock Disc Road Wheels 700c Front
$672.00
Made with ultralight composite rims, this pro-level mid-profile aero disc WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 Disc is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite disc brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell, Centerlock Disc rotor mount and pawl based driver system - Includes end caps for the following configurations: - Front: 100x12mm T/A & 100x5mm QR - 1580g per pair
Strider Ultralight Replacement Wheel
$15.00
• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model
Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Giant SLR 1 30mm Carbon Climbing Road Wheels 700c Rear
$735.00
Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 1 30 delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1380g per pair
Zipp 30 Course Disc Brake Rear Wheel (Clincher)
$555.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.
Giant TRX 0 27.5 Carbon Trail
$992.00 - $1,213.00
- Ultra-light full composite 27.5-inch rims - Tubeless compatible using supplied rim strips and valves - 33mm wide rim for better tire performance - DT Aerolite/Aero Comp bladed stainless steel spokes; 28-hole front/rear - Dynamic balance lacing technology for enhanced drive efficiency and braking control - Alloy locking nipples - Giant alloy hub shell, 6-bolt disc compatible, DT internals - 36T star ratchet with 10° engagement - Compatible with SRAM XX1 drivetrain using optional XD driver bodies - 1540 grams per pair (Boost) - 1455 grams per pair (100/142)
Zipp 808 Firecrest Tubular Disc Brake Wheel
$1,250.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Tubular Disc Brake. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.
Stan's NoTubes Arch MK3 27.5 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Flow S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
DT Swiss XR 1501 Spline ONE 22.5
$526.00 - $737.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
DT Swiss E 1700 Spline 30
$289.00 - $532.00 $361.00 - $532.00 Up to 25% Off
When tracks get really, really rocky and the roots are thicker than your legs, it is time to choose a wheel like the E 1700 SPLINE 30. Paired to a 2.5-inch tire you end up with an enormous amount of grip, allowing you to attack even the nastiest sections quite relaxed. The wheel build with double butted Competition spokes in their strongest straight pull edition is based on DT's reliable and lightweight Ratchet System hubs. A combination just right for Enduro use: strong enough to go through anything, light enough to get there.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss ARC 1100 Dicut 62 Non-disc
$1,316.00 - $1,830.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT Swiss athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
DT Swiss PR 1600 Spline 32 Non-disc
$315.00 - $420.00
The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.
Campagnolo Bora One 35 Disc Brake Clincher Wheelset
$2,550.00
Campagnolo has developed a totally reworked disc brake version of the Bora One that transfers skills and knowledge gained in years of experience and introduces a new logic and innovative technologies to ensure unprecedented results. The Bora One Disc Brake is the most sophisticated carbon wheel on the market and one of the few specifically designed for disc brake systems. It is extremely light yet stiff, resistant to shock and perfectly balanced: a versatile wheel for any kind of route. - Use of resins and materials that guarantee superior finish and good UV resistance - Designed specifically for disc brake systems - Lightweight uphill thanks to its 35mm rim - Smooth and safe downhill thanks to its USB bearings - The layers of carbon are hand positioned to ensure the perfect equilibrium of weight and performance - Monolithic aluminum hubs optimize disc braking torque - Weight: 1483 grams
Campagnolo Neutron Ultra Clincher Wheelset
$1,110.00
This classic is the ultimate all-rounder. The Neutron Ultra are now a well-established symbol of success for Campagnolo wheels'. The wheel of choice of amateur cyclists and professionals alike, its features are unique: Exceptionally lightweight for climbing and extremely reliable; these wheels are reactive when required as well as comfortable and smooth on rough roads, even after many hours on the saddle. Neutron Ultra are the answer to all a cyclist's needs. - Low-profile aluminum rim makes the wheel extremely lightweight as well as offering optimal features for climbing - Carbon hubs are also designed to reduce weight to the max - Straight spokes make the wheel highly reactive when out of the saddle - Elasticity of the polygonal rim ensures both high responsiveness and optimum comfort during riding - Oversize flange boosts the torsional stiffness of the rear wheel, especially during the power phase - Milled, low-profile rim guarantees a reduced overall weight - Carbon hubs and aluminum axle guarantee performance and lightness - Asymmetrical hole pattern on the rear rim ensures continuous spoke tension and lasting performance
SRAM Rise 60 27.5-inch Front Wheel
$950.00
When unparalleled speed and pedaling efficiency is what you desire, SRAM's Rise 60 Front Wheel rises to the occasion. This featherweight hoop with Carbon Tuned rims and butted stainless spokes blend just enough strength and stiffness with an impeccably low weight. Once they start spinning, there's almost no stopping the incredibly smooth, durable Speedball Ceramic bearings. The hook-less rim design results in a wheel that’s lighter, stronger and more resistant to the impact of XC racing. DOUBLE TIME hub and pawl geometry integrates seamlessly with any ride for a frictionless experience on the trail. Quicker bursts, tighter turns, better rolling and easier climbs. Softer landings and smoother descents. Bigger wins. Louder cheers. Every wheel connects you to the ground. Only a few can carry you to new heights. - Intended use: XC and Trail - CARBON TUNED rim for tubeless clinchers - Customizable decal kit - Front axle compatibility: 9x100 QR, 9x100 QR OS, 15x100 - Tire Type: Tubeless Ready Clincher - Rim Joint: Carbon - Eyelets: None
Campagnolo Bullet 50mm Wheelset
$1,425.00
Campagnolo's Bullet wheels bring together the aerodynamic benefit of a deep carbon rim and the consistent braking power and modulation of an aluminum brake track for a best-of-both-worlds scenario that'll propel you one step closer to the podium. Aerodynamic spokes further reduce wind resistance and Campy's impressive G3 rear-wheel lacing pattern drops weight and increases responsiveness for instant-on power transfer. Of course, they're super light and the aluminum hubs are fitted with Campagnolo's legendarily smooth bearings for a practically frictionless ride.
Giant P-XCR1 29er Rear Wheel
$266.25 $355.00 25% Off
Giant's P-XCR1 29er Rear Wheel is a lightweight aluminum wheel ready to hit the trails. Tubeless-compatible with the supplied rim strip and valve, this 28-spoke hoop is laced to a Giant hub shell with DT Swiss' star ratchet system for excellent engagement and miles of smooth, efficient rolling.
Stan's NoTubes Arch EX 27.5 Rear Wheels (Shimano)
$354.00
Inspire confidence in your ride with the ZTR Arch EX. Proven in the Enduro World Series, but light enough to be a favorite among XC racers everywhere, the Arch EX is Stan's most versatile rim design. The patented low-profile Bead Socket Technology design offers superior tubeless compatibility for less rolling resistance, more control, and better traction. Lightweight performance is important, but the Arch EX was designed to let you maintain control on even the most technical of trails. For maximum durability, an internal arch reinforces the rim, adding strength and stiffness. Combined with a thicker spoke bed, the Arch EX is an ideal choice for more aggressive and heavier XC and trail riders. The Arch EX wheelset now includes the stronger, faster-engaging Neo hub system. The Neo's 100% CNC machined shell, larger bearings, and stronger, stiffer, shoulderless axle offer unmatched strength and reliability. Featuring four precision-engineered pawls and a 36-tooth ratchet ring, the Neo offers fast 10-degree engagement. With new SealLock endcaps, tool-free disassembly, and a huge range of options, the Arch EX wheelset with Neo hubs is here to make any bike faster and more reliable. - For trail and all mountain use - Stan's most versatile rim design - Bead Socket Technology (BST) for superior tubeless performance - Lightweight rim profile with reinforced internal arch - 24.6mm rim width increases tire volume for more control and less rolling resistance - Compatible with standard tires when used with or without tubes
Stan's NoTubes Sentry S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
DT Swiss ARC 1100 Dicut 48 Disc
$1,330.00 - $1,843.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
Mavic Crossmax 27.5-inch Rear
$201.35
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adapters.
Mavic Cosmic Elite UST WTS Front
$211.45
The Cosmic Elite is a perfect entry point into high-level race performance. This all-new UST Road Tubeless system delivers a smoother ride with and improved puncture resistance while retaining a lightweight feel for climbing and accelerating. By removing the tube, we’ve also removed friction—so there’s less rolling resistance, which means it requires less energy to reach higher speeds. The UST system, including the sealant that makes them more resistant to punctures, is also 40g lighter than a traditional tube and tire system. It also delivers a proven aero advantage: Wind tunnel testing led us to create a 30mm deep rim that optimizes aero performance and improves stability in crosswinds. The alloy rim benefits from Mavic's unrivaled experience creating light yet strong rim extrusions. Mavic does this by carefully tuning the thickness of the rim wall to hit the sweet spot between stiffness, strength and weight. Pedaling torque is efficiently transferred with Mavic's FTS-L freewheel system, which is light, smooth, stiff and easy to service. The hub easily converts from Shimano/SRAM to Campagnolo cassette. The Cosmic Elite comes with Mavic's Yksion Pro UST tires, which deliver a very low rolling resistance to further enhance the efficiency of these wheels.
SRAM Rise 60 27.5-inch Rear Wheel
$1,040.00
When unparalleled speed and pedaling efficiency is what you desire, SRAM's Rise 60 Rear Wheel rises to the occasion. This featherweight hoop with Carbon Tuned rims and butted stainless spokes blend just enough strength and stiffness with an impeccably low weight. Once they start spinning, there's almost no stopping the incredibly smooth, durable Speedball Ceramic bearings. The hook-less rim design results in a wheel that’s lighter, stronger and more resistant to the impact of XC racing. DOUBLE TIME hub and pawl geometry integrate seamlessly with any ride for a frictionless experience on the trail. Quicker bursts, tighter turns, better rolling and easier climbs. Softer landings and smoother descents. Bigger wins. Louder cheers. Every wheel connects you to the ground. Only a few can carry you to new heights. - Intended use: XC and Trail - CARBON TUNED rim for tubeless clinchers - Customizable decal kit - Rear axle compatibility: 10x135 QR, 12x135, 12x142 - Tire Type: Tubeless Ready Clincher - Rim Joint: Carbon - Eyelets: None
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Front
$1,150.00
The 303 brings a lot to the table, including heritage proven in the world's hardest races. At the center of the wheelset is Zipp's 77/177 hubset, which results in improved stiffness, durability, simplicity and versatility. The carbon wheel that helped pioneer the Firecrest rim platform for improved aerodynamics and crosswind stability also features the unspoken durability that has repeatedly won Paris Roubaix and the Tour of Flanders - Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 and 12x142 dropouts
Page 1 of 14 Next page