Wheels

Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed

The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB. - Zipp graphics and cosmetic identity that scream speed - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Built with Sapim CX Sprint J-bend spokes - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

- Alloy 700c rims - Tubeless compatible using supplied rim strips and valves - 23mm wide rim for better tire performance - 30mm rim height - Stainless steel, straight pull, double butted spokes - Dynamic Balanced Lacing provides significantly higher transmission stiffness vs. traditionally laced wheels - Alloy locking nipples - Giant Alloy hub shell with pawl based driver - Centerlock disc compatible

The new SLR 1 50 Disc WheelSystem combines aerodynamic efficiency and minimized power loss in a lightweight package designed for versatile road performance. The SLR 1 50 features 50mm aero rim profiles for efficiency on the flats and a dynamic ride quality on hillier roads. Hookless rims with a broad inner width offer greater support for high-volume tires along with enhanced sidewall stiffness for better grip and cornering. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile provides a maximum aerodynamic advantage - High tensile strength carbon fiber is placed at only the most crucial points to provide optimal stiffness and class-leading weight - Hookless rim design saves weight and creates a broad 22.4mm inner rim width for increased actual tire contact patch, resulting in better traction and compliance - A thick rim bead of up to 3.8mm on each side enhances rim bead stiffness, offering increased support for better cornering - Dynamic Balanced Lacing (DBL) technology makes a stiffer, more efficient wheel as a wider hub flange increases spoke bracing angles for outstanding power transmission - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance and minimizing power loss SPECIFICATIONS - Tubeless: Giant Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG, SRAM XDR (XDR driver sold separately) - Bearing: Sealed Cartridge - Weight (Rear): 815g

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

Zipp's 3ZERO MOTO carbon 27.5 enduro/trail wheel is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

The SLR 1 42 WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 Skewers Included Yes

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 197mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 94mm - Rim inner width range 45mm+ - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D202SB - Wheel Weight 1720g - Spoke Type Stainless Black - Valve Presta - Rim External Width - - Depth 20mm - Rim Model Evo JP96 - Skewers Included No

Exploring your limits has never looked so good. The all new EC90 AX carbon wheelset joins Easton's AX series as high performance, high adventure wheels built to endure. Race-ready weight, reliable design, and fire-road tested durability mean you can seek more while stopping less. EC90 AX wheels are built to keep you rolling, wherever the path less traveled leads. Wide, 24mm internal rims on both wheelsets are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, singletrack forays, and unrelenting gravel races. Like all our EC90 wheels laced to Vault disc hubs, the EC90 AX wheelset is covered by our carbon confidence guarantee.

Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black

Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.

This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Campagnolo's aerodynamic Bora WTO Disc Brake wheel with a 45mm profile is designed to appeal to a broader customer base. The design of the rim enables maximum aerodynamic penetration, and at certain angles, the wind can actually become a valuable ally to the rider. The wheel features carbon rims with a unidirectional aerodynamic finish, aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. - 24-spoke elliptical cross section results in a superior rolling resistance Specifications: - Hub/Brake Compatibility: Center-Lock Disc - Cassette Body Type: Shimano/SRAM 11 Speed Road - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Tire Type: Tubeless Ready Clincher

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

Designed to be "the ultimate British Columbia XC rim" It blurs the line between trail and XC while coming in at an exceptional weight. Features a Lifetime Warranty. Product Details: TR32 wheelsets use front and rear specific rims, each with a tailored layup to meet the needs of the unique forces the front/rear wheels. They have a ‘sine wave' shape to aid in side stiffness which is embedded into the molds. Since they are intended for lighter wheel builds, they come in 28h only. The lower profile, sidewall reinforcement, nipple bed design, new mold and profile shape have allowed us to combine everything we loved about our previous XC and Trail rims and combine them into one. The TR32 rim set, matches the weight of a pair of our old narrower TR28 rims while maintaining the versatility and durability of our beloved TR33's. The ultra quick Industry Nine Hydra offers 690pts of engagement, while being available in a slew of vivid anodized colours. Incredibly easy to service, it will offer years of reliable, trouble free performance. Paired to our TR32 rims, you end up with a light weight, performance focused wheelset that will take you across mountains, or on to the podium at your local XC race. A 29" TR32 Industry Nine Hydra wheelset with Sapim D-Light spokes, comes in at 1507g. All NOBL wheelsets come taped with valves and ready to go! Simply throw your tires on with sealant and you’re set!

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 29-inch

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - EXP ratchet system for a lighter, stiffer, and more durable hub - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

We’ve upgraded our venerable EA90 SL wheels, dropping weight and increasing strength. Now, for the first time, Easton is making a tubeless ready wheelset. This allows for durable Sapim straight-pull spokes with standard nipples, enhancing durability and reducing the need for proprietary parts. A completely redesigned rim features a category-leading 19.5mm internal rim in a deeper and stiffer 27mm blunt shaped rim that borrows from our aerodynamic Fantom shape. Finally, these battle-tested wheels are centered on our award-winning Echo hubs. This wheelset is completely hand-built and acoustically tuned using Easton’s painstaking wheel building methods.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)