Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Stan's NoTubes Tubeless Valve Stems
$16.00 - $17.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Chris King XD Driveshell Conversion
$211.50
Chris King ISO XD Driveshell assembly conversion kit, no bearings.
PowerTap 15mm Aluminum Freehub Body Kit (11-Speed)
$99.99 - $299.99
PowerTap’s 15mm Aluminum Freehub Body Kit is constructed of stiff, light aluminum and steel, and rolls on fine bearings. This is the correct replacement freehub for your PowerTap 11-speed wheel.
Muc-Off No Puncture Hassle Tubeless Sealant
$10.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
HALO Rear Axle Replacement Kit, DJD/Supa Drive
$15.96 $19.95 20% Off
- Rear axle replacement kit, 10mm nutted, DJD-SupaD - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible
HALO Porkies Quick Release Skewers
$22.45 - $24.95 $24.95 Up to 10% Off
- Longer skewers fit modern frames/forks with thicker dropouts - Aluminum lever/nut, Delrin pivot washer, serrated alloy nut with Nylock - White skewers are powder-coated - Shaft: chromoly - Wheel: front/rear - Spacing (front/rear): 100/135mm - Weight: 112g/set
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$9.90
Replacement Pawls for all Oozy hubs.
Stan's NoTubes Neo OS Front Hub End Caps
$22.00 - $24.00
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Stan's NoTubes Neo Replacement Rear Axle
$18.00
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
SRAM Conversion Caps for Roam 60 and Rail 50 Wheel (Front)
$39.20 - $50.40 $59.00 Up to 34% Off
SRAM's Conversion Caps are just what you need to convert your Roam 60 or Rail 50 front wheel to fit your fork.
HALO Front Axle Conversion, Spin Doctor
$9.98 $19.95 50% Off
- Front axle conversion for Spin Doctor hub - Various replacement axles and conversion kits for Spin Doctor and Spin Doctor Pro hubs - Some conversions utilize pre-existing axle components for retrofit - Conversion kits for original Spin Doctor and Spin Doctor Pro hubs are not compatible with Spin Doctor 6-Drive hubs - 14mm nutted "stub" bolt-on system requires Halo Front Axle Replacement Kit (sold separately)
HALO XD-11 Freehub Body, Spin Doctor 6-Drive
$62.95 $69.95 10% Off
- XD-11 freehub body for Spin Doctor 6-Drive rear hub - For use with SRAM XD 11-speed cassettes - Comatible with Spin Doctor 6-Drive MTB hubs only
HALO Thru-axle Endcaps, Spin Doctor 6F (Front)
$14.95
- 15 x 100mm thru-axle endcaps for Spin Doctor 6F (front)hub - 20 x 110mm thru-axle endcaps for Spin Doctor 6F (front hub - Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
DT Swiss Prolock Hexhead Alloy Nipples
$67.60
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
Mavic Front Road Quick Release
$28.90
Mavic's road quick releases feature a composite lever and Mavic's exclusive cam system. Sturdy and tight, they allow quick and secure wheel fixing.
Crank Brothers Front Axle and Endcap Kit
$19.99
Front axle and endcap kits for all non-boost 2017 cobalt, iodine, and zinc wheels. Use this front axle and endcap kit to convert any non-boost 2017 cobalt, iodine, or zinc wheel to the size selected below.
Stan's NoTubes Neo Conversion Kit
$37.00 - $52.00
Kit allows you to convert your Neo or Neo Ultimate hub. The thru-axle to QR kit includes two SealLock end caps and Stan's aluminum quick-release skewer. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. The QR/thru-axle to bolt-on kit includes end caps, threaded axle, bolts and washers. Bolt-on axles are recommended to prevent slipping and wheel misalignment in frames with horizontal drop-outs. - Not compatible with Centerlock or Boost hubs
Stan's NoTubes Neo QR Skewer
$20.00
Quick release skewer with reliable internal cam and serrated nut for sure grip. Does not include end caps. Quick release and SealLock end cups offered separately. Not compatible with Boost hubs.
Giant On-Road Trainer Rear Thru-Axle
$40.00
Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle
Evo Blade QR Skewers
$24.99
- 6061-T6 aluminum lever construction - Cr-Mo axle - Road 100mm/130mm - MTB 100mm/135mm - 110g
Vision Presta Valve Extender
$5.99
Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30HD Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
HALO Rear Track Axle Conversion
$29.95
- Converts a 120mm OL spacing track hub to 130mm OL Road spacing 10mm nutted steel axle
Crank Brothers Front Endcaps Kit
$35.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
SRAM XD Driver Freehub Body for 900 Rear Hub
$67.00
Replacement freehub body for Sram 900 series hubs
Stan's NoTubes Alloy Tubeless Valve Stems
$26.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
HALO 14 Gauge Nipples
$13.95
- 14 gauge forged 7075 alloy with CNC finish - Matches Halo and Gusset anodized colors perfectly - Sold in bags of 50 - length: 12mm
HALO Pawl And Spring Kits
$14.95 - $25.95
- Replacement pawls and springs for DJD Bush Drive rear are for original DJD or DJD-Bush Drive rear hub - Replacement pawls and springs for Spin Doctor 6-Drive are compatible with all 6-Drive hubs - Replacement pawls and springs for Supa Drive are compatible with all Supa Drive hubs - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible
WTB TCS Rim Tape
$12.95 - $26.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Page 1 of 5 Next page