Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Wheels

$910.00
Made with ultralight composite rims, this pro-level mid-profile aero WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1466g per pair
$755.00
The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires
$996.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
$839.99
Exploring your limits has never looked so good. The all new EC90 AX carbon wheelset joins Easton's AX series as high performance, high adventure wheels built to endure. Race-ready weight, reliable design, and fire-road tested durability mean you can seek more while stopping less. EC90 AX wheels are built to keep you rolling, wherever the path less traveled leads. Wide, 24mm internal rims on both wheelsets are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, singletrack forays, and unrelenting gravel races. Like all our EC90 wheels laced to Vault disc hubs, the EC90 AX wheelset is covered by our carbon confidence guarantee.
$850.99
- Unidirectional Toray T700 carbon fiber construction - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 559 - Width ID: 80 - Width OD: 85 - Profile: 22 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 610g - ERD: 542 - Tire Compatibility: Tubeless Compatible
$753.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
$787.00
Campagnolo Zonda Disc Wheels are a benchmark for all aluminum disc brake wheelsets. It features a completely redesigned structure specific to bicycles with disc brakes. The result is all-round improved reactivity, especially thanks to the asymmetrical rims and Mega G3 hubs on both wheels. This innovative solution provides a stable front wheel that is able to absorb energy from the braking torque generated on the left-hand side and a rear wheel that guarantees maximum power transfer from the cyclist. - Compatible with HH12, QR and 135 and 142 rear hubs. - 6 screws and AFS to ensure full compatibility with every disc available on the market. - The front wheel also features G3 technology for top performance even during very powerful braking.
$925.00
- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.
$849.99
Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto our Vault Hub gives you a stronger, stiffer wheel construction and the Vault’s Super Fast Engagement, long bearing life, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - Low drag labyrinth cassette body seal - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals
$897.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty
$825.00
- 30mm wide rim with an Enduro style layup. Designed for tires in the 2.4 to 2.7 range. - Offset rim bed for balanced spoke tension. - Tripel hub with quick 3.5 degree engagement, and super low drag. - Super strong hookless rim.
$925.00
- The Ultra-light carbon XC wheel - Hookless rim wtih an internal width of 26mm, mates perfectly with fast rolling cross-country tires ranging from 2.1” to 2.4”. - Quest Disc MTB hubs (120 grams for the front and 245 grams for the rear) with their super quick five-degree engagement, tool free service and centerlock spline for disc brake rotors. - Pillar Wing 20 J-Bend spokes and alloy nipples are laced double-cross with 24 spoke front and 28 spoke rear. - The ultra-light, yet durable, 370-gram rim measures 26mm internal, featuring a 2.8mm offset rim bed for better tension balance and a more responsive wheel build. - These specs total up to a 1380-gram wheelset that has a modern day wider rim design and can handle the rigors of cross country mountain bike riding.
$900.00
- The 44mm Clincher is the the best all-purpose carbon clincher wheelset in the Boyd lineup. - No matter what type of riding you are doing, the 44mm depth with improved aerodynamic profile will be a great option for you.
$799.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
$897.00
Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty
$799.99
Race Face Next SL wheels are ready to maximize your trail riding; Super Light for XC but wide and strong for aggressive days on the mountain. Like their Next R wheels, Next SL have been designed to take full advantage of the benefits carbon fiber has to offer - durability, compliance, and weight savings in a 26mm width. The asymmetrical build onto the Vault Hub gives you a stronger, stiffer wheel construction, and tool-free end caps simplify your life. Get ready to take your ride to the Next level. HUB FEATURES - Large oversized flange for improved bracing angle and larger bearings - Wide bearing stance - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) - RIM FEATURES - Full carbon fiber construction - 26mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals
$849.95
CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.
$833.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight
$858.00
- Laced with Sapim Laser triple-butted spokes and mechanically locking alloy nipples. - M-pulse Hub - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for 2.00"-2.25" XC and Trail tires
$825.00
- Quest centerlock hubs, Pillar Wing 20 spokes, and external nipples for the ideal gravel wheel set, built to withstand your hardest rides on your most adventurous weekends! - Wide rim platform for modern gravel tires. - Boasting a 26mm internal width, the updated Jocassee goes to a shallower and lighter 25mm depth. This allows the rim weight to go down to 353 grams in a 700c.
$750.00
HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Thus far, our Big Deal fat rims and wheels have won the hearts of cyclists around the world. What if that's not enough for you? What if we told you that we now have an even BIGGER deal than before? Enter: The Big Half Deal (B.H.D.). This is a special, larger diameter version of our beloved 85mm-wide carbon Big Deal rim. With a 27.5-inch size, it's smack-dab-HALF-way between a 26" wheel and a 29" wheel. If you have a new-fangled 27.5" fat bike, this is THE performance rim choice. Like other Big Deals, the B.H.D. is tubeless ready with our patented Inflatobam technology. Tech Notes 1. Do NOT use tire levers on B.H.D. rims! 2. Specific to our Big Deal line of carbon rims: If you choose to ride these rims on regular dirt trails (e.g. NOT in soft snow or sand), wider tires and higher air pressure will decrease the chance of rim damage from striking an obstacle. We strongly recommend an honest assessment of your ride style. For the BHD, use 8psi minimum on groomed snow, or 10psi minimum on dirt and rocks - both with a minimum tire size of 3.8". Additional Info - Rim Width: 85mm - Rim Material: Carbon - Rim Weight: 465 grams - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 589 (includes washer)
$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples
$799.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
$753.00
Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
$781.99 - $804.99
- Carbon rims available in two different profile heights featuring improved brake tracks - Toray T700 carbon in both Unidirectional and 3k carbon weaves for strength and integrity - Tubeless compatible rim bed with an 18mm internal width supports wider modern road tires Specs: - ISO: 622 - Width ID: 18 - Width OD: 25 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 470g - ERD: 569
$750.00
HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)
$849.95
CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro
$975.00
- True disc gravel rim - At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease - Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail - Generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed surface cyclists. - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready
$800.00
- The 44mm Clincher is the the best all-purpose carbon clincher wheelset in the Boyd lineup. - No matter what type of riding you are doing, the 44mm depth with improved aerodynamic profile will be a great option for you.
$799.99
- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 4.5mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - One length spoke used throughout wheelset (F&R)
Page 1 of 2 Next page