Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

SRAM AXS RockShox Seatpost Controller
$200.00
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS. - AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components - Compatible with Matchmaker X - System is completely water and dust proof to IP69K
Profile Design Flip Ergo 50a Aerobar Extensions
$182.00
The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g
Profile Design Hypersonic Ergo 50a Extensions
$182.00
The Hypersonic/Ergo platform is designed to give riders a low stack bar with easy adjustability of extension length and rotation. The Hypersonic bracket offers our new generation fit range in a low stack, under-mount format. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 50a extensions, this aerobar encourages a neutral wrist angle. - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 112mm to 280mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 39mm
Campagnolo Super Record/Record EPS V3 Interface Unit
$180.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - New shape with LED indicators on 3 sides - Battery charges through the Interface Unit, no more need to drill a charging port hole in the bicycle frame - Contains a wireless module allowing for connection to PCs, smartphones, tablets, etc., through ANT+ and Bluetooth Low Energy (BLE). Requires the use of Android 4.3 or newer, or iOS 8 or newer - Only compatible with Campagnolo Super Record and Record V3 Power Unit - Waterproof to 1m for 30 minutes (IP67 Rated) - Weathertight, o-ring sealed connectors - See PDF for complete details on the V3 app and customization
Giant Contact Aero Clip-On Clamps - Contact SLR Aero
$180.00
- Compatible with Contact SLR Aero handlebar
CeramicSpeed 6803 Coated Bearing (61803)
$176.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm
Giant Contact SL Clip-on Clamp
$175.00
- Compatible with 31.8mm round handlebars - Adjustable armrest adapts to a wide range position - Includes 20mm, 40mm, and 60mm spacers - Fits Giant Contact SL/Connect SL bar extensions (22.2mm)
Profile Design Airstryke II
$171.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g
CeramicSpeed 61806 Bearing (6806)
$169.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm
CeramicSpeed 6802 Coated Bearing (61802)
$169.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
Profile Design Sonic Ergo 45AR Aero Bar Extension
$169.00
The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g
Wheels Manufacturing Inc. 5mm Zinc Plated Steel Fastener Kit
$168.00
- Zinc plated for durability - All screws grade 12.9 - 475 Pieces Kit contains: - M5 X 10 Button Head qty. 20 - M5 X 12 Button Head qty. 20 - M5 X 16 Button Head qty. 20 - M5 X 12 Socket, Zinc qty. 35 - M5 X 16 Socket, Zinc qty. 35 - M5 x 20 Socket, Zinc qty. 15 - M5 X 25 Socket, Zinc qty. 10 - M5 X 30 Socket, Zinc qty. 10 - M5 X 12 Flat Socket Head, Spd qty. 25 - M5 X 16 Flat Socket Head, Spd qty. 25 - M5 X 8 Flat Socket, Zinc qty. 20 - M5 Nut qty. 50 - M5 Nylock Nut, Zinc qty. 40 - M5 Acorn Nut, Zinc qty. 10 - M5 Flat Washer qty. 65 - M5 Oversized Flat Washer qty. 25 - M5 Lockwasher qty. 25 - M5 Toothed, Zinc qty. 25
RockShox XLoc Full Sprint Remote
$161.00 - $167.00
This hydraulic lockout offers completely sealed and dependable fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
CeramicSpeed 6901 Coated Bearing (61901)
$163.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm
Zipp Vuka Carbon Evo Extensions
$160.00
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm
Zipp Vuka Carbon Extensions
$160.00
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo 70 and 110 extensions Vuka Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is now available for the first time in carbon, allowing for even more complex shaping and lighter weight. Vuka Race Carbon Extension The Vuka Race Carbon Extension was designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with Vuka Clip, Vuka Aero and all 22.2 systems - Internal cable routing
Zipp Vuka Carbon Race Extensions
$160.00
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. Vuka Race Carbon Extensions were designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm
MRP 2x Dual Ring Chain Guide
$159.95
- Shiftable guide for SRAM and Shimano 2X cranks - Patented removable skid - Dual 9t sealed-bearing pulley design for superior chain management - BB, ISCG and ISCG-05 mounting options, 136g
CeramicSpeed 61805 Bearing (6805)
$156.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 25mm - Outer Diameter: 37mm - Width: 7mm
Pro Missile Evo Bridge Kit
$144.99 - $154.99
- Riser set including 10 x 1cm spacers and bridge for stability - Includes required bolts - Aluminum aerodynamic construction that meets UCI requirements - Color: SB black - Weight: from 40g
FSA BB30 Ceramic Bearing Set
$152.99
Upgrade your BB30 bottom bracket to the long-lasting smoothness of FSA Ceramic Bearings. Lighter and harder than steel, ceramic bearings can reduce friction, increase durability, and lighten your bike. What's not to like?
Shimano Di2 Battery Charger
$103.99 - $149.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Wheels Manufacturing Inc. Drivetrain Spacer Kit
$145.00
Comprehensive shop kit for bottom bracket and cassette/freewheel spacing need. 139 pieces in a durable plastic storage box. Kit includes: - (20) 1.0mm FW Spacers - (10) 1.5mm FW Spacers - (10) 2.0mm FW Spacers - (10) NCS-4.5mm Cassette Spacers - (10) SHIM-.3MM Spacers - (10) SHIM-.5MM Spacers - (8) 0.5mm 24mm ID Spacers - (8) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (4) BB30-CLIPs - (4) BB30/PF30 Wave Washers - (4) GXP Wave Washers - (4) .7mm Bottom Bracket Spacers - (4) 1.8mm Bottom Bracket Spacers - (9) 2.5mm Bottom Bracket Spacers - (8) 0.5mm 30mm ID Spacers - (8) 1.0mm 30mm ID Spacers
Zipp VukaClip Alumina with Alumina Evo Extensions
$140.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Designed with input from top bike fitters, the shape of the Vuka Evo Extensions are crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position. - Bar-setting fit, security, and adjustability - Compatible with most extensions
Zipp VukaClip Alumina with Alumina Race Extensions
$140.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Vuka Race Extensions feature 52mm of rise along with a bend that places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Bar-setting fit, security, and adjustability - Compatible with most extensions
Vision Mini TT Clip-On Bar
$139.99
- Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) - Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads
RockShox Remote Upgrade Kit - OneLoc
$98.00 - $138.00
The OneLoc remote from RockShox provides total control over your RockShox fork at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes, and RockShox's Reverb remote (all sold separately). Includes remote, cable and housing.
RockShox Reverb Remote Lever Assembly A2/B1
$137.00
RockShox Reverb Remote Assembly for A2 and B1 generation Reverb dropper seatposts. - Includes remote Lever, MMX clamp, Discrete Puck, 1500mm of new hose, new hose barb, and new hose strain relief - Works with A2 and B1 generation posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle.
CeramicSpeed 6804 Bearing (61804)
$136.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 20mm - Outer Diameter: 32mm - Width: 7mm
Profile Design Subsonic Bracket Kit
$136.00
The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon. - Materials: Forged 6061-T6 AL - Stack Height: 23.5mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 352g