Surly's Ice Cream Truck turns up the volume on fat. With unmatched traction and float courtesy of super wide tires (up to 4.8-inches wide!), and the flickable geometry of your favorite trail bike, this fatty feels frisky, limber, and ready for action. The symmetrically spaced 190mm rear end uses Surly's Modular Dropout system for an array of rear axles choices. 197mm thru-axle? 190mm geared? Singlespeed? All equally plausible possibilities with the Ice Cream Truck. A 44mm headtube provides fork options, and the frameset ships with a suspension-corrected, 150mm fork with a 15mm thru-axle. Surly's proprietary 4130 chromoly steel and corrosion-fighting ED coating add a hefty dose of tough to this bike. Now, where do you want to ride your Ice Cream Truck?
The Surly Pugsley may be the original fat bike, but this one is far from the original. Previously a great all-around fat bike, the Pugsley has been redesigned to be an ideal off-road touring and exploration rig. Surly lengthened the chainstays 12mm for stability when loaded and so your heels float effortlessly past panniers. The tweaked rear rack mounts on the dropouts let you center your rack over the wheel, despite the offset rear triangle. Those dropouts will take a 142 x 12mm thru axle if that's your schtick, but can also be used with 135 x 10mmm QR hubs with Surly's Adapter Washers. Pugsley brings back the 135mm-spaced offset fork, so you can run a front wheel with a spare cog or freewheel as a bail-out option to swap with the rear if your internally-geared hub freezes up in neutral or you smash your derailleur having too much fun. A plethora of three-pack mounts give you gear-hauling options aplenty, so go wild with your build. - 100% Surly 4130 chromoly frame, main triangle is double-butted; 1-1/8" threadless brazed chromoly fork - Four sets of Three-Pack Mounts (two on the fork, two on the downtube), a water bottle mount on the seat tube, and front and rear rack mounts - 142 x 12mm rear dropout (or 135 x 10mm QR with Surly 10/12 Adapter Washers) with Rohloff torque arm slot - 135mm-spaced fork with 17.5mm offset for wheel swappability - 26 x 4.8" tire clearance in frame (with drivetrain restrictions), 26 x 4.3" tire clearance in fork
The Surly Pack Rat is designed around porteur-style racks and front-loading optimization, with a front cargo-specific design to eliminate steering issues. The fork features internal routing for generator hubs and rear frame dropouts to accommodate multiple drivetrain configurations. It’s an ideal choice for loaded commutes and bike trips with a lighter load, but also rides great when unloaded. - 100% Surly 4130 Chromoly frame, main triangle is double-butted; 1-1/8" threadless brazed Chromoly fork - Bosses front and rear for cantilever or linear-pull brakes, rack and fender eyelets at the dropouts, eyelets at the crown, and fully threaded through-blade fork eyelets for a front rack - Semi-horizontal dropouts with a derailleur hanger for geared or singlespeed drivetrains and/or wheelbase adjustability
Wednesday is a frame with a decade of Surly's Omniterra design experience distilled into one steel package. Wednesday can ride over the same type of pretty much anything all of their other Omniterra bikes can, but they borrowed elements from both their Trail and Touring categories to create an Omniterra ride that can truly handle anything you want to attempt. Want to point the thing down a mountain and roll those dice? Wednesday has geometry spry enough to get you through the techy stuff, stable enough for the fast stuff, and doesn’t feel sluggish when you have to ride back to the top. It also has the chops for any sort of expedition you may want to undertake. It has plenty of bottle mounts; triple bottle bosses on both fork legs and the down tube; standard bottle mounts on the seat tube and underside of the down tube; plus rack mounts on the frame and fork and fender eyelets on the dropouts, along with barrel bosses on the crown, fork legs and mid-blade, thru-blade eyelets on the fork as well. It also has internal dropper post routing and Surly Trip Guides to manage all the housing and cables on your frame with style. Wednesday also has its very own dropout design as well – a rear-facing, slotted dropout that can use either 10mm or 12mm axles and exit rearward or vertically. They’re cast steel and spaced at 170/177mm. Wednesday gives you a lot of options in the tire clearance category. In the full-forward, short chainstay position you can run 26 x 3.8? tires on 80mm rims and in the full-rearward, longer chainstay position you get the option of 26 x 4.6? tires on an 80mm rim. Wednesday is made out of Surly's own proprietary 4130 CroMoly steel and is ED coated for extra protection from the elements.
On Giant's Anthem X Advanced 29er, you're a recurring character in your competitors' nightmares. This ludicrously light Advanced-Grade Composite frame makes even the steepest grades easy. And, after you crest the summit, Maestro suspension and a RockShox shock take over to dissolve trail obstacles and maximize shredding. Build it up with a 100mm fork and you've got the perfect set up to rule marathons, all-day epics, XC races and fast trail rides. It's not just race-day only, it's more than capable on steep descents and gnarly sections. Both the tapered head tube and the big BB92 bottom bracket contribute to frame stiffness, straight tracking and efficiency. It's every XC rider's dream: speed and maneuverability with 29er control and smoothness.
What does ECR mean? Anything you want it to. Go camping, ride the Divide Trail, disappear into the woods, and conquer any road. Surly's ECR is a super capable camping machine/trail bike that's outfitted to explore wherever you point the front wheel. Surly's favored chromoly tubing damps road buzz and provides a nimble, responsive ride. The heart of the ECR is the 29+ wheel capability, with clearance for 29 x 3.0-inch tires. Fat tires mean smooth-rolling traction, stability to spare, and a touch of suspension over the roughest terrain. On top of all that, frame eyelets galore are just waiting for racks, fenders, and whatever else to make this your pedal-powered escape pod.
Say hello to Surly's rowdy, trail-shredding Instigator 2.0. The no-nonsense chromoly frame is made for charging hard and going big. It's super tough, yet handles nimbly and accelerates like mad. The heart of the bike is Surly's 26+ platform which has clearance for 50mm-wide rims and 2.75-inch tires, so you get endless traction and the rollover-action of a 27.5-inch wheel, coupled with the snappy, go-fast responsiveness of a 26-incher. The geometry is dialed for a 140mm travel suspension fork and features a long top tube and short rear end for more of the same fun. And this thing is versatile, the frame comes with dropouts for rolling singlespeed, or geared with a quick release or a 142x12mm through-axle with a Shimano direct-mount hanger.
This is the second version of a 650b mountain bike from Ritchey – Tom started to design his first in 1977. Even back then, Tom had a feeling that there was an advantage to the "middle" wheel size, but it took the rest of the cycling world three decades to figure it out: a 650b (or 27.5") wheel provides the bump-eating smoothness of a 29er, with the light, responsive feel of 26" wheels. Finally, the era of the 650b wheel is here. The P-650b is a close relative to the P-29er. Up front there's the proprietary forged-and-machined, gram-shaving integrated head tube featured on all new Ritchey frames. Forged socket dropouts and a new chainstay-mounted rear disc brake mount save a few more grams. And like every frame Ritchey makes, geometry and tubing is carefully fine-tuned by Tom, to bring the legendary balanced, nimble Ritchey feel to 27.5-inch wheels. - Weight: 2,028g for frame (L/17”) - Ritchey forged-and-machined 1.5” tapered head tube - Clearance for up to 2.25-inch tires - Fork: Designed for use with 100mm travel forks - Headset: Integrated 1.5” tapered - Upper bearing: 41.8mm OD / IS42/28.6 (S.H.I.S.) - Lower bearing: 52mm OD / IS52/40 (S.H.I.S.) - Bottom Bracket: 68mm English threaded - Rear spacing: 10x135 - Front derailleur: 28.6 low clamp – top or dual pull - Weight: 2178g / 4.8 lbs (M/17”, frame only)
The Karate Monkey frame features updated, progressive trail geometry, a new tubeset, and Surly’s Gnot-Boost rear dropout system to support multiple drivetrain and wheel size configurations. - 100% Surly 4130 chromoly steel frame and fork; double-butted main triangle and 44mm headtube - Tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing works with 142 x 12, 148 x 12mm, and 135mm w/ 10/12 washer - Internal dropper seatpost routing - 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires
Amp up your trail riding adventures with this all-new, all-conquering 29er. Whether you’re gunning for faster enduro times or bagging a big backcountry loop, do it like a boss on this big-wheeled singletrack shredder. It took years for our team of engineers, product designers and pro riders to create a new mid-travel 29er that met their high standards, but the wait was worth it. The rebirth of this trail bike marks a huge step forward, offering a true advantage in all-round trail performance. It starts with a full composite frame that’s fitted with our most up-to-date Maestro suspension. The Advanced Forged composite rocker arm and trunnion-mount shock help produce 115mm of smooth rear-wheel travel that’s active and sensitive to small bumps, giving you killer traction and confident control. And the frame geometry is all new, with progressive headtube and seattube angles, shorter chainstays and a longer toptube—all engineered to balance the speed and control of its 29-inch wheels with the quickness and agility you need to rail corners, hammer through rock gardens and do it all with confidence and control.
The Edict FRD is the pinnacle of Felt’s mountain bike engineering. Featuring Felt’s legendary FAST suspension platform and a no-holds-barred philosophy on frame design, the Edict FRD is the ultimate XC race bike. Its proprietary UHC Ultimate + TeXtreme carbon fiber construction yields the lightest, stiffest frame in the Edict family. Ready to let you build your dream XC mountain bike was built to deliver you to the top of the mountain and the top step of the podium.
Speed meets stability. This superlight, composite XC flyer blends the most up-to-date Maestro suspension technology with totally reengineered 29er geometry. If XC racing is your game, this is the perfect partner for your podium quest. Handcrafted with a superlight Advanced-grade carbon frame, this XC flyer features 90mm of smooth rear suspension travel and 100mm up front. The new trunnion mount shock produces a lower leverage ratio for better pedaling and braking efficiency, and also allows for shorter chainstays to improve the bike’s climbing capabilities and agility. The Advanced Forged Composite upper rocker arm is lighter, stiffer and stronger than the previous aluminum version. And the combination of wider Boost hub spacing and a Giant WheelSystem gives you super strong and stiff wheels for confident, precise handling on XC terrain.
Enduro racers looking to build up their ultimate dream bike need look no farther than the Compulsion frame kit. Decked out in a modern, muted Matte Olive finish, the Compulsion’s full carbon frame includes a carbon rear triangle and carbon links. Featuring Boost spacing, a 1x-specific design, and Felt’s Flip Chip Technology that allows the rider to adjust the bike’s geometry from high and steep to low and slack quickly and easily, the Compulsion is ready for whatever the enduro course or the trail throws your way.
Years ago the Karate Monkey helped start the 29” wheel movement and, as time’s gone by, many companies – Surly included – have experimented with even more wheel sizes. With so many different types and sizes of tires now on the market, riders have begun to understand the effect that tire width has on overall wheel diameter, and with ample tire clearance, you can see the benefits of multiple wheel sizes all on one bike. 27+ tires have the same rolling diameter as a 29” wheel, yet you get all the traction and flotation benefits of extra-wide knobbies. And that’s just the tires. The Karate Monkey frame has recently gotten a make over that includes the addition of features like internal dropper post routing, a new tubeset that uses the same trumpet tubes found on our Instigator 2.0, and a slight tweak in geometry that is more progressive and trail-oriented. The Karate Monkey uses a horizontal dropout with a derailleur hanger that features Gnot-Boost spacing, which gives the rider the ability to run any kind of mountain bike hub they choose. 10 x 135mm QR, 12 x 142, or 12 x 148 Boost will all work in the Karate Monkey frame. The frame uses a 44mm headtube for broad fork compatibility and is ED coated for an added layer of internal protection. If, at any point, you decide you want to throw on some skinny meats, standard 29” wheels and tires can be swapped in with no issue. If you want to round-house kick some trail right in the face, the Karate Monkey is your sled.
Surly's Krampus rolls fast, holds speed, and devours corners. It's designed for 29 x 3-inch tires, offering increased traction, incredible float, huge rollover, and low-fi suspension to take your trail ride to new heights of fun. Surly built this frame and fork out of tapered and butted chromoly and gave the frame a long top tube and short chainstays, so it's playful, smooth, versatile, and durable. Boost front spacing keeps you current with the latest MTB tech, and, "Gnot Boost," rear spacing means you can run any the rear hub you want: 135 x 10 QR, 142 x 12mm, or 148 x 12mm thru axles. This frameset also offers internal dropper post routing so you're granted a license to get rowdy, which you really can't help but do on a Krampus.
The Surly Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. It’s the bike you turn to when you’re not entirely sure what the night has in store. It’s the bike to grab when you want to have just as much fun riding to the trail as you do on the trail, itself. Singlespeeding is an integral part of Surly’s DNA, and the Lowside continues the tradition, by taking a simpler approach to trail riding. - 100% Surly 4130 chromoly frame, main triangle is double-butted; 1 1/8" threadless chromoly fork - Singlespeed "specific" (derailleur hanger: yes; Trip Guides: no) - Dropper post routing - Gnot-Boost rear spacing - Front and rear thru-axles - 26 x 3" or 27.5 x 2.8" tire clearance
$1,599.00 - $1,650.00
The Big Fat Dummy is a long tail cargo bike that took a few too many doses of growth hormones. At first glance, you might say that Surly just put bigger tires on a Big Dummy. But if you said that, you'd actually be very wrong so just… don't. Think of Big Fat Dummy as more of a second or third cousin to Big Dummy rather than a brother. They share some of the same DNA and look sort of similar, but they're two very different bikes and really only interact when they both reach for the potato salad spoon at that family reunion that no one really wants to be at anyway. Now that that's out of the way, let's get down to the nitty gritty of what makes this hulking beast of a bike tick. Surly's goal with designing a cargo bike around fat tires was to create the most stable, stiff, and traction-laden ride possible while hauling a ton of stuff. Big Fat Dummy has a longer toptube and slacker headtube than its more svelt cousin giving it a nice, predictable, and stable ride. They also used thinner, lighter tubing to construct its cargo area so while it's an overall burlier bike, there's not much difference in weight. Big Fat Dummy accepts either 10mm or 12mm axles in the rear with a spacing of 190/197mm. That big ‘ol spacing equates to one thing: tire clearance for days. Big Fat Dummy maxes out at a massive 26 x 5.25" tire.* While that large of a tire provides the most traction and stability a bike can possibly offer, it's also a lot of rubber to push and might not be for everybody. Luckily, Big Fat Dummy is also a blast to ride with 3" tires too. It uses the same 100mm suspension-corrected fork as the Wednesday, meaning if you want to add a little squishy-squishy to your ride, you can throw a Bluto on and let ‘er rip. If you intend to carry a passenger on your Big Fat Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. All Big Fat Dummy framesets and bikes ship with a Dummy deck, rails, bags, and the aforementioned Dummy Rail Collars so you can immediately start hauling cargo — human or otherwise. Big Fat Dummy is ready and willing to carry all sorts of crap — literally. It's already in use on an organic farm in Ecuador so it's likely that it's hauled some form of manure by now. *Using a 26 x 5.25" tire will cause some drivetrain limitations. For all the nuts and bolts of compatibility read Surly's blog on the subject.
The Wednesday is the result of over a decade of Omniterra design experience distilled into one steel package. It can easily ride over or through most anything our other Omniterra bikes can and then some. With the Wednesday Frameset, Surly borrowed elements from some of their Trail and Touring models to create an Omniterra whip that can truly handle anything you want to attempt. Want to point it down the side of mountain? Go ahead, roll those dice. And if you make it to the bottom, you’ll be able to ride back to the top for round two. Wednesday’s geometry is spry enough to get you through techy stuff, stable enough for the fast stuff, and doesn’t feel sluggish on terrain-crawling stuff. While Wednesday is plenty confident on terrifying terrain, it also has the chops for any sort of expedition you may want to undertake. Surly gave it all the necessary braze-ons and mounts for whatever accoutrements you feel necessary in your travels. Racks? Front and rear, friend. Fenders? You got it. Bottle mounts? How does triple bottle bosses on both fork legs and the down tube, and two sets of standard mounts on the main triangle grab you? They even gave Wednesday internal routing for a dropper post and Surly Trip Guides to keep everything nice and neat and free of rat’s nests. In the dropout department, Wednesday uses a cast steel, rear-facing, slotted dropout that can exit either rearward or vertically. They’re compatible with either 10mm or 12mm axles and are spaced at 170/177mm.
The fastest, most confident Reign ever built. This enduro crusher features a lightweight composite frame that’s engineered for speed on rowdy terrain. Tested by Giant pros on extreme Enduro World Series terrain, it’s ready to rip. Updated and refined for the Giant Factory Off-Road enduro squad last year, the latest Reign Advanced features a longer, lower cockpit for fast, aggressive trail riding performance. It’s engineered with a lightweight, super-stiff Advanced-grade composite mainframe and ALUXX SL aluminum rear swingarm. The Maestro suspension system delivers 160mm of smooth, active travel with a trunnion mount shock and our Advanced Forged Composite upper rocker arm—which is lighter and stronger than the previous aluminum design. And it’s all designed around the performance benefits offered by 27.5 wheels, giving you the confidence and control to be fast and loose on hard-hammering terrain.
If you’re like us, your bike needs will likely change by the day, week, month or year. Ogre will get you to your job during the week, then way out of town on the weekend. It even has the chops to handle a cross-country trek or nine. It’s not sluggish on pavement or gravel and can also hold its own on singletrack. Ogre is designed to be the ultimate steel utility vehicle. It relishes in those “take-the-long-way-home-and-find-some-beverages-along-the-way” sort of commutes. You can also haul enough crap on it that you don’t even have to go home if you don’t want to. For this year, we simplified Ogre a bit. We removed the canti studs, so it is now a disc brake-only beast. Now, before you start yelling at us about how the canti studs were the only reason you were even considering buying an Ogre and now we’ve left you contemplating your very existence in this ultimately-doomed universe, hear us out. Rim brake 29er rims — like the ones that you would need to have to make use of those canti studs in the first place — are becoming increasingly harder to find. We could have given you a feature that you’d end up not really being able to use in the future but what kind of monsters do you think we are? To quench your unquenchable thirst for rim brakes, check out the Troll. As far as other updates to the frame go, that about sums it up. Ogre still has everything else you’ve come to know and love: two water bottle mounts, four sets of three-pack bosses, mid- and low-blade fork eyelets, threaded holes for racks, fenders, and trailer mounting nuts, and a Rohloff OEM2 axle plate slot. It still features horizontal-slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefy tire clearance. It’s still fully compatible with both 29 x 2.5” and 27.5+ tires. In the complete bike version, we’ve opted to go with a 1x drivetrain and a flat handlebar. We typically try to avoid BS cliché terms like “Do-It-All” or “Swiss Army Knife of Bikes”, so we’ll just say that Ogre can probably handle most of the ideas that are bouncing around in your head.
The ECR is Surly's answer to those times when you just need to escape to the woods for a while to get away from the humdrum of life. Those familiar with this steel mule know it’s designed around plus tires, previously of the 29” variety. A fully loaded 29+ bike is an excellent way to explore and get away for a while… if you’re of a certain stature that is. For smaller riders, it poses several challenges though. And no one wants new problems when they’re in the woods trying to escape old ones. To solve this, Surly redesigned the smaller sizes of the ECR to work with 27.5+ while the larger sizes are still equipped with 29+. All you medium specimens out there get your pick of the litter as they're offering that size in both options. Other updates to the ECR include and are limited to: Gnot-Boost rear spacing and a killer new beige paint job. It retains the abundant accessory mounts that we all know and love like Surly Trip Guide for brakes and derailleurs, fender, rack, and Bill/Ted eyelets, and a Rohloff torque arm slot. The 27.5+ sizes also feature two sets of Three-Pack bosses. You’ve got lots of options to bring all your “necessities” with you and still have room for excess baggage if you’ve got it.
If you’re like us, your bike needs will likely change by the day, week, month, or year. Surly's Ogre can get you to your job during the week, then way out of town on the weekend. The latest version of the Ogre has received some fantastic updates, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefier tire clearance — all in a 29er/27.5+ platform. Ride it any day of the week; it’s not sluggish on pavement or gravel and can also hold its own on singletrack. - Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle, or 148 x 12mm Boost hubs. - Full-length Surly Trip Guide housing line guides for derailleurs and brakes - Two sets of bottle cage mounts - Disc and rim brake compatible with removable post cantilever pivots - Upper seatstay threaded barrels with mid- and low-blade fully threaded through-blade fork eyelets - Threaded holes for racks, fenders, and trailer mounting nuts - Rohloff OEM2 axle plate mounting slot - Tire clearance for 29 x 2.5” or 27.5 x 3”
The ECR is Surly's answer to those times when you just need to escape to the woods for a while to get away from the humdrum of life. Those familiar with this steel mule know it’s designed around plus tires, previously of the 29” variety. A fully loaded 29+ bike is an excellent way to explore and get away for a while… if you’re of a certain stature that is. For smaller riders, it poses several challenges though. And no one wants new problems when they’re in the woods trying to escape old ones. To solve this, Surly redesigned the smaller sizes of the ECR to work with 27.5+ while the larger sizes are still equipped with 29+. All you medium specimens out there get your pick of the litter as they're offering that size in both options. Other updates to the ECR include and are limited to: Gnot-Boost rear spacing and a killer new beige paint job. It retains the abundant accessory mounts that we all know and love like Surly Trip Guide for brakes and derailleurs, fender, rack, and Bill/Ted eyelets, and a Rohloff torque arm slot. The 29+ sizes have two water bottle mounts and one set of Three-Pack bosses. You’ve got lots of options to bring all your “necessities” with you and still have room for excess baggage if you’ve got it.
Take the title you deserve with Scott’s Scale RC 900 WC N1NO HMX Frame, the bedrock of an all-out race machine that dominates XC courses with technologies that are years ahead of competitors. This HMX-SL carbon frame weighs in at a mere 879g in size medium and now increases comfort and fatigue reduction without giving up any of the stiffness that makes your power go further. Pair with a lightweight suspension fork or a 100mm corrected rigid fork to build the fastest XC bike you've ever propelled on dirt.
Built with industry-leading carbon fiber technology, including Felt’s own UHC Advanced carbon material for a lightweight and responsive chassis, the Decree 1 frame kit offers you the chance to build your dream trail bike. With 140mm of rear travel and the ultra-efficient FAST suspension system, the Decree 1 is equally adept at leisurely rides on your local trail and taming the roughest singletrack you’ll find anywhere.
The Wednesday is Surly's all-terrain fat bike frame. The frame features trail-ready geometry, 4.6-inches of tire clearance, provides lots of cargo carrying capabilities and is suspension corrected for use with a 100mm suspension fork (sold separately). - 100% Surly 4130 CroMoly steel with 44mm headtube and internal dropper post cable routing - Frame is ED Coated for increased life expectancy - 1-1/8" straight steerer fork, 4130 CroMoly - 100mm threaded bottom bracket shell - Universal cast dropouts accommodate thru-axle or quick-release standards
Off-road touring can be a zesty enterprise, but it’s not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent’s basement. If you’re going to ride your bicycles where no one can see, you better take gear that’s up to the task. Troll is up to the task. Our Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. We’ve also adorned this frame with our Gnot-Boost spacing, allowing you to use any mountain bike hub whether it be 135mm QR, 12 x 142mm thru-axle, or 12 x 148mm Boost hub. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and the dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don’t get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the down tube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible. Man has known for eons the call of the indifferent forest. The inexorable march of time, and dumb crap like cell phones, have dulled our senses and made us afraid. Reclaim your animalistic tendencies atop Man’s greatest invention.
Off-road touring can be a zesty enterprise, but it's not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent's basement. If you’re going to ride your bicycles where no one can see, you better take gear that's up to the task. Troll is up to the task. Surly's Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. Surly also adorned this frame with their Gnot-Boost spacing, allowing you to use any mountain bike hub whether it be 135mm QR, 12 x 142mm thru-axle, or 12 x 148mm Boost hub. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and the complete bike comes with the always-comfy Surly Moloko Bar. The dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don't get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the downtube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible. Man has known for eons the call of the indifferent forest. The inexorable march of time, and dumb things like cell phones, have dulled our senses and made us afraid. Reclaim your animalistic tendencies atop Man's greatest invention.
Giant's Reign Advanced 27.5 0 Team is a long-travel machine that scales the ugliest climbs and dismantles the longest descents. An Advanced-grade composite frame with ALUXX SL aluminum rear triangle is complemented by Giant's renowned Maestro rear end with 6.3-inches of RockShox Monarch Plus DebonAir RC3 travel. A beefy BB92 bottom bracket shell and OverDrive tapered head tube means optimal power transfer and pinpoint tracking when slashing the dirt. The down tube protector, neoprene chainstay guard and DT Swiss 142x12mm DT Swiss thru-axle are the perfect finishing touches for this enduro, all-mountain, backcountry mountain slayer.
The All-City Electric Queen was expressly made for maximum fun. Sitting squarely in the “trail” category it goes up almost as well as it comes back down. Short wheelbase, modern trail geometry, and plus size tire clearance makes this a non-stop dirt party no matter what terrain you’re tackling that day. Its whippy 612 chromoly frame with internal dropper post routing, boost spacing, and those short chainstays make berm-carving and wheelies second nature. Build your Queen with 27.5+ wheels and tires with your favorite fork, drivetrain, and brakes for a dreamy rig that rules with radical energy.
Page 1 of 2 Next page